Ultratop Loft (Aquatus) Лампа из гималайской соли Gold`s Gym & Dilijan International school (Aquatus) Полиуретановые полы Mapei (Aquatus) Tiles for swimming pool (Aquatus) Офис фирмы Акватус Продукция Mapei (Aquatus) Harvia (Aquatus)

Connecting a vacuum cleaner to the skimmer

The vacuum cleaner is designed to mechanical cleaning the bottom and walls of the pool. There are basically two types of vacuum connections – to the skimmer or via water intake nozzle adapter.
Consider the most popular way to connect – to the skimmer.
Vacuuming when connected to a skimmer
A hose is connected from one side to the brush, on the other hand – via a skimmer, an adapter cap. You can clean the pool when the pump is running, and dirt and debris by suction will get either a filter or directly discharged into the sewage system, depending on the operating mode of the filter system.
ATTENTION!
1. Before using the vacuum cleaner is necessary to lower the bar with a brush and a hose in the pool, and remove the air from the hose.
2. When using a vacuum electric heater should be turned off.
3. For heavily soiled cleaning the pool bottom and walls of the lead in the “emptying” ( “waste”), in all other cases – in the “filtration” ( “filtration”).
4. Do not allow the ingress of air through a “vacuum cleaner” in the filter housing. In the case of air entering delete it, including a filter in the “backwash” ( “back wash”) and “seal” ( “rinse”). (See. Recommendations for filter operation).

Connecting a vacuum cleaner to the skimmer

All Right Recevied © 2000-2017 Aquatus Aquatus