Category: Materials for the concrete repair

Materials for the concrete repair Mapei

Mapecoat I24

Mapei-mapecoat-I-24

Mapecoat I24 Two-component epoxy paint for anti-acid coatings on concrete surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Colour of mix: white, grey (Ral 7001) and neutral. Application temperature range: from +5°C to +30°C. Workability time: 30-40 minutes. Setting time of film: 4-5 hours. Waiting time between first and […]

Mapegrout T60

Mapegrout-T60

 Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 4 cm per layer on vertical […]

Mapegrout Hi-Flow

Mapegrout-Hi-Flow

Fibre-reinforced, controlled-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT HI-FLOW with 13-14 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 4 cm per layer. Classification: EN 1504-3 […]

Mapefill 10

Mapefill-10

Mapefill 10 – ready to use the material in a dry concrete mix for anchoring on the basis of high-strength cement, graded aggregates and special additives with an expanding agent. When mixed with water Mapefill 10 becomes a very fluid concrete mix without segregation that is able to fill even the most complex holes. The […]