CTX-392 Multiaction tablets

Multiaction in 250 g tablets with simultaneous disinfectant, algaecidal and flocculent function.

  • Check Mark Quality assurance

With a single application it removes bacteria, viruses and micro-organisms in general from the pool water; it prevents the growth of algae and keeps the water crystal clear.
Ideal for: Pools made of ceramic materials.
In just one product, it offers the action of chlorinated disinfectant, a flocculating action, and also an algaecide.

With the disinfectant, it also has a stabilising action against UV radiation.
Initial treatment: Add 15 g of dichlor granules CTX-200/Gr ClorShock 55% for each m3 of water.
After 2 hours, adjust the pH of the water between 7.2-7.6 using solid pH reducer CTX-10 pH- or solid pH increaser CTX-20 pH+.
Maintenance treatment: Once the pH of the water has been adjusted, add 1 tablet of CTX-392 MultiAction 250g for each 20 m3 of water for 7 or 10 days.
These doses are a general guide and may be modified according to the characteristics of each pool, weather, etc.
The initial treatment (Super-chlorination) should be repeated whenever the water lacks transparency.
Place the required dose of product CTX-392 MultiAction 250g inside the skimmers, then put the equipment into filter mode so that the product can dissolve as the water circulates through the skimmers.
It is essential that the entire volume of water in the pool is recirculated through the pool filter system every day.
The free residual chlorine should be between 0.5-2 mg/l, with this value being easily measured using a chlorine and pH analysis kit.
These checks should be carried out at least twice a day.