Application recommendations:
Place the required amount of MultiAction10 CTX391 in the skimmer, then start the filtration system. During filtration, the product will dissolve completely. It is also acceptable to dose the product directly into the pool water, but only when there are no bathers and preferably in the evening.
The chlorine level should remain between 0.5 and 2 mg/l. Measurements are recommended twice daily using chlorine and pH test kits.

Dosage:
The dosage is continuous. After adjusting the pH level, add 1 tablet of MultiAction10 CTX391 per 25 m³ of water every 7–10 days.
This dose is considered standard and may be adjusted depending on the climate and specific characteristics of the pool.

Initial treatment should be carried out until the water becomes completely clear.