Instruction for use

Always adjust the pH before adding chlorine to the water, to make it as effective as possible. Introduce the necessary product doses inside the skimmers. Connect the filtering equipment after and you will have the product dissolved in the water, because water will be flowing through the skimmers. It is necessary that all the water in the swimming pool flow again through the purifier  equipment.
The residual free chlorine will have to be placed between 0,5 and 2 mg/l. This value will easily be measured using an analyzer chlorine and pH case. This control will have to be done twice a day minimum.

Dosage

Initial treatment: Add 15 grs. of ClorShock for m3 of water. Wait for two hours before adjusting the pH level
between 7,2 – 7,6 using either ctx 10 pH Minus solid or ctx 20 pH Plus solid.
The initial treatment will have to be repeated whenever you notice a lack of transparency in the water.

Maintenance treatment: Once we have the water pH adjusted, add 1 tablet of Multi-action ctx393 for 25 m3 of water for every 7-10 days.

These doses are the ones suggested and can be modified according to the own characteristics of every swimming pool, climate, etc.